As an Amazon Associate I earn from qualifying purchases.
ROCKBROS #ad - Sturdy, simple design makes servicing a bicycle a breeze. Also works great as a bow vice, great value. Durable materials: the bike stand for maintenance is made of iron, mountain bike, durable for long time. Space saving: you can choose to install the bicycle repair stand to the work bench or wall.
Quick release design allows you to easily assemble work bike stand. Soft non-slip silicone clamp is efficient and non-damaging bicycle paint finish.
Suit for commuter bike, road bike. Tips: load Capacity:44 Pounds. Easy to mounted: the bike clamp bench mount is secured by four long screws and can be mounted stably and easily. Plus you can flip it around when you’re not using it so it doesn’t stick out. Easy to use: rotate the upper arm to hold the bike by the vertical seatpost or by the horizontal frame and tighten the various clamp.
CHEPARK #ad - Suitable for mountain road bikes, also perfect for small bikes such as balance bikes. Max load 88lbs bike stand: made of durable steel, can effortlessly repairs e-bikes, light-weighted and compact. Space-saving design: for a space saving bike repair stand, consider the small and mighty CHEPARK Bench Mount Bike Repair Stand! The mounting plate has 4 holes, it sets up on your workbench in minutes, then swivel the stand's arm when the job is done!.
Even when taking the front or rear wheel off during repairing, it is still stable. Steady and stable: this desk-mount repair stand is firmer and more stable than normal floor one.
360 degree rotating: the clamp head rotates 360 degree by a quick-release handle and a turning button, easy for you work on your bike at any angle. Height adjustable: adjust the height via quick release from 60cm to 86cm23. 6” to 33. 85”, it fully adapts to a range of different height need and enables you to repair the bike easily. The clamp holds tubes from 1 inch to 1. 75 inch and has rubber protectors that will not harm the finish.
ROCKBROS #ad - With wall fixed design, the wall beach mount repair stand can support general maintenance and cleaning work. Tips: hold up to 20kg/44lbs mounted on work bench, less than 20kg/44lbs mounted on wall. Clamp material has a certain softness and protect your bike frame well.
It locks in place against the wall and uninstall arms when not in use, takes up less space and is more convenient to keep at home. The wall mounted bike clamp acts like a strong arm with a firm grip, holding your bike in a fixed position as long as you need so you can clean or repair bike easier.
35inch to 55cm/21. 65inch simply, also perfect for small bikes such as balance bikes. Stably mounted: the wall mount bike repair stand is secured by four long screws and can be mounted stably and easily. Durable materials: made of iron, this home bike maintenance rack is durable for long time. Space saving: you can choose to install the bike repair stand to the wall or work bench, even post or on the ground.
Clothink #ad - Constructed with heavy duty tubes and well made head and clamps, road bike. Soft non-slip silicone clamp is efficient and non-damaging bicycle paint finish. Save space: for a space saving bike repair stand, consider the small and mighty Clothink Bench Mount Bike Repair Stand! You can choose to install the bicycle repair stand to the work bench or wall.
More convenient to storage in home or garage. 360 degree rotating clamp: the bike stand with 360 degrees rotating clamp can hold your bicycle steadily, which means you can use it to repair almost any bikes, easy for you work on your bike at any angle.
Tips: load Capacity:44 Pounds. Easy to use: rotate the upper arm to hold the bike by the vertical seatpost or by the horizontal frame and tighten the various clamp. Adjustable height: the height of the bike repair stand can be adjusted from 8. 66" to 18. 1" via quick release. Sturdy, simple design makes servicing a bicycle a breeze. Our clamp allows for clamping of bike tubes from 30mm to 75mm, from a kid balance bike to a pro mountain bike.
BIKE HAND #ad - The distance from the center of the clamp to the wall is approximately 16" 41cm. It can handle harsh bike mechanic or maintenance jobs, such as removing and installing pedals, bottom brackets etc.
Rigid: the wall mounted repair stand is more rigid than portable or foldable floor type. Durable: the bike work stand was released to the market for more than 10 years. Please watch the video in the listing for more details.
Order now, worry free! we're so confident about our product quality that we can provide 5-year warranty! Made in Taiwan. Mounts to any flat surface: Mounting Bolts NOT included. The teeth and clamp are well made and heavy duty. It has been approved one of the most reliable and durable bicycle repairs stands available for home or shop uses.
1. Park Tool
#adPark Tool Bench Mount Repair Stand
#adPark Tool #ad - Mounting flange has four holes, allowing use of bolts or lag bolts to mount. Uses the same adjustable linkage clamp and locking system as the PCS-4. Easily mounted on any workbench. Durable powder coated finish.More information #ad
| Brand | Park Tool #ad |
| Manufacturer | Park Tool #ad |
| Height | 5 Inches |
| Length | 15.5 Inches |
| Weight | 8 Pounds |
| Width | 8 Inches |
| Part Number | PRS-7-1 |
| Model | PRS-7-1 |
| Warranty | Limited Lifetime Warranty - See parktool.com/warranty |
More information #ad
2. Park Tool
#adPark Tool PCS-12.2, Home Mechanic Bench-Mount Repair Stand Black/Blue
#adPark Tool #ad - Easy to use. 360° infinite clamp rotation allows bike to placed in optimal position for specific repairs. All steel structure for maximum stiffness and durability. Cam actuated, micro adjustable clamp allows quick entry and exit and fits 1" to 3" 25mm–76mm diameter tubes.More information #ad
| Brand | Park Tool #ad |
| Manufacturer | Park Tool #ad |
| Height | 5 Inches |
| Length | 12.5 Inches |
| Weight | 0.22 pounds |
| Width | 8 Inches |
| Part Number | PCS-12.2 |
| Model | PCS-12.2 |
More information #ad
3. ROCKBROS
#adROCKBROS Bike Repair Stand Bench Mount Home Bike Stand for Maintenance Bike Clamp Workbench Work Stands Bicycle Repair Rack for Road Mountain MTB Bikes
#adQuick release design allows you to easily assemble work bike stand. Soft non-slip silicone clamp is efficient and non-damaging bicycle paint finish.
More information #ad
More convenient to keep at home. Adjustable clamp: the bench mount bike repair stand with plastic clamps are sturdy and perform well, Clamp allows for clamping of bike tubes from 30mm to 75mm. Suit for commuter bike, road bike. Tips: load Capacity:44 Pounds. Easy to mounted: the bike clamp bench mount is secured by four long screws and can be mounted stably and easily. Plus you can flip it around when you’re not using it so it doesn’t stick out. Easy to use: rotate the upper arm to hold the bike by the vertical seatpost or by the horizontal frame and tighten the various clamp.
| Brand | ROCKBROS #ad |
| Manufacturer | ROCKBROS #ad |
| Part Number | 27210002001-CBR/1 |
More information #ad
4. CHEPARK
#adBench Mount Bike Stand Rack Workstand, E bike Repair Stand Shop Home Mechanics for Mountain Bike and Road Bike, CHEPARK Bike Repair Stand Max 88lbs
#adEven when taking the front or rear wheel off during repairing, it is still stable. Steady and stable: this desk-mount repair stand is firmer and more stable than normal floor one.
More information #ad
By stabilizing and mounting in surface, it can help deal with difficult bike maintenance work. Constructed with heavy duty tubes and well made head and clamps, fat-tire or road mountain heavy bikes with max weight of 40kgs/88lbs, perfect for home or shop bicycle mechanics. 360 degree rotating: the clamp head rotates 360 degree by a quick-release handle and a turning button, easy for you work on your bike at any angle. Height adjustable: adjust the height via quick release from 60cm to 86cm23. 6” to 33. 85”, it fully adapts to a range of different height need and enables you to repair the bike easily. The clamp holds tubes from 1 inch to 1. 75 inch and has rubber protectors that will not harm the finish.
| Brand | CHEPARK #ad |
| Part Number | USXL-T350 |
| Model | USXL-T350 |
More information #ad
5. Park Tool
#adPark Tool Bench Mount Workstand
#adPark Tool #ad - Easily mounted on any workbench. Uses the 100-5d micro-adjustable clamp. Clamp rotates 360-degrees. Durable powder coated finish. Mounting flange has four holes, allowing use of bolts or lag bolts to mount. Mounting bolts not included.More information #ad
| Brand | Park Tool #ad |
| Manufacturer | Park Tool #ad |
| Height | 5 inches |
| Length | 16 inches |
| Weight | 6.8 Pounds |
| Width | 8 inches |
| Part Number | PRS-7-2 |
| Model | PRS-7-2 |
| Warranty | Limited Lifetime Warranty - See parktool.com/warranty |
More information #ad
6. ROCKBROS
#adROCKBROS Bike Repair Stand Wall Workbench Mount Rack Workstand Clamp Height Adjustable Home Bicycle Maintenance Rack for Road Mountain Bikes
#adIt locks in place against the wall and uninstall arms when not in use, takes up less space and is more convenient to keep at home. The wall mounted bike clamp acts like a strong arm with a firm grip, holding your bike in a fixed position as long as you need so you can clean or repair bike easier.
More information #ad
Adjustable clamp: 360 degrees rotating clamp can hold your bicycle steadily, allows your bike to be held in any angle. Height adjustable: made of telescopic design, suitable for mountain road bikes, the height of the bike repair stand can be adjusted from 39cm/15. 35inch to 55cm/21. 65inch simply, also perfect for small bikes such as balance bikes. Stably mounted: the wall mount bike repair stand is secured by four long screws and can be mounted stably and easily. Durable materials: made of iron, this home bike maintenance rack is durable for long time. Space saving: you can choose to install the bike repair stand to the wall or work bench, even post or on the ground.
| Brand | ROCKBROS #ad |
| Manufacturer | ROCK BROS #ad |
| Part Number | MP-01/US |
| Model | MP-01/US |
More information #ad
7. Park Tool
#adPark Tool Deluxe Wall Mount Repair Stand
#adPark Tool #ad - Uses 100-3C clamp. Designed to be easily mounted to any post or wall stud. Shop quality stand using the same clamp and locking system as the PRS-2, PRS-3 and PRS-4. Powder coat finish.More information #ad
| Brand | Park Tool #ad |
| Manufacturer | Park Tool #ad |
| Height | 13.78 Inches |
| Length | 13.78 Inches |
| Weight | 8.87 Pounds |
| Width | 13.78 inches |
| Part Number | QKPRS4W1 |
| Model | PRS-4W-1 |
More information #ad
8. Clothink
#adBicycle Maintenance Workstand Repair Rack for Mountain Road Bikes, Clothink Bike Repair Stand Wall Mount Height Adjustable
#adMore convenient to storage in home or garage. 360 degree rotating clamp: the bike stand with 360 degrees rotating clamp can hold your bicycle steadily, which means you can use it to repair almost any bikes, easy for you work on your bike at any angle.
More information #ad
High load-bearing: the bike stand for maintenance is made of iron, suit for commuter bike, durable for long time, mountain bike, sturdy and stable. Tips: load Capacity:44 Pounds. Easy to use: rotate the upper arm to hold the bike by the vertical seatpost or by the horizontal frame and tighten the various clamp. Adjustable height: the height of the bike repair stand can be adjusted from 8. 66" to 18. 1" via quick release. Sturdy, simple design makes servicing a bicycle a breeze. Our clamp allows for clamping of bike tubes from 30mm to 75mm, from a kid balance bike to a pro mountain bike.
| Brand | Clothink #ad |
| Manufacturer | Clothink #ad |
| Weight | 0.22 Pounds |
| Part Number | BIKE-3 |
| Model | BIKE-3 |
More information #ad
9. BIKE HAND
#adFor Mountain Bikes and Road Bikes Maintenance, Wall Mount Bicycle Mechanics Home Workstand, Bikehand Bike Repair Stand
#adRigid: the wall mounted repair stand is more rigid than portable or foldable floor type. Durable: the bike work stand was released to the market for more than 10 years. Please watch the video in the listing for more details.
More information #ad
Max bike weight limit: 25kg or 55 lbs at any angle. Rotated head: smart design: head rotated:360 degree by a quick release and turning knob. We keep enough parts for any claim in our warehouse. Order now, worry free! we're so confident about our product quality that we can provide 5-year warranty! Made in Taiwan. Mounts to any flat surface: Mounting Bolts NOT included. The teeth and clamp are well made and heavy duty. It has been approved one of the most reliable and durable bicycle repairs stands available for home or shop uses.
| Brand | BIKE HAND #ad |
| Manufacturer | BIKE HAND #ad |
| Height | 7.87 Inches |
| Length | 24.02 Inches |
| Weight | 5.8 Pounds |
| Width | 1.97 Inches |
| Part Number | YC-116 |
More information #ad
