Top 10 Solar Controller 12V – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Depvko

#ad

2021 Upgraded 30A Solar Charge Controller, Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display 30a

#ad
Depvko #ad - You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, commercial, industrial, etc. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.

Safe to use: equipped with overcurrent protection, low voltage, inverse connection protection, and overcharge protection, short-circuit protection, and have fully 3-stage PWM charge management. Upgraded solar panel controller: compatible with 12v 24v system. This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller.

Lcd display: let you know the status and data with LCD Display. If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2. 5a max. Do not support any other batteries. Please note: the charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. This 30a solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
BrandDepvko #ad
ManufacturerDepvko #ad

2. Renogy

#ad

Renogy Wanderer Li 30A 12V PWM Negative Ground Charge Controller Compatible with Lithium, Gel, and Flooded batteries and Renogy Bluetooth Module, Sealed

#ad
Renogy #ad - Optimized for a 12v system; Deep cycle Sealed, Gel, Flooded, and Lithium battery option ready. Multiple led indicators for easy to read charge status and battery information.

Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch. Then secure each cable by rotating the screws clockwise CW to the closed position. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.76 Inches
Length6.45 Inches
Weight0.3 Pounds
Width4.31 Inches
Part NumberRNG-CTRL-WND30-LI
ModelCharge Controller
Warranty1-year material and workmanship warranty

3. Victron Energy

#ad

Victron Energy SmartSolar MPPT 100V 20 amp 12-24-Volt Solar Charge Controller Bluetooth

#ad
Victron Energy #ad - Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.

The victron energy smartsolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation. Mppt solar charge controller: by constantly monitoring the voltage and current output of your solar PV panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.

Smartsolar mppt 100-volt 20 amp: a solar charger gathers energy from your solar panels, Using the latest, fastest technology, and stores it in your batteries, SmartSolar maximises this energy-harvest.
BrandVictron Energy #ad
ManufacturerVictron Energy #ad
Height1.97 Inches
Length8.27 Inches
Weight1.19 Pounds
Width5.91 Inches
Part NumberMPPT 100|20
ModelMPPT 100|20

4. HZRE

#ad

Solar Charge Controller 80A PWM 12V 24V 1920W Solar Panel Charger Discharge Regulator with 5V USB Output Multip Circuit Protection Anti-Fall Durable ABS Housing Discharge Regulator for Lighting System

#ad
HZRE #ad - Our controller is backed by full money back guarantee! if for any reason you are not satisfied with this purchase, kindly contact us and our dedicated world class customer support team will offer a replacement or full refund without any cost from your side! Simple operation: 1, adjustable Charge-Discharge Parameter 4, Operation Mode of Load is Settable.

Intelligent high-complex protection Technology: Short Circuit Protection, Over-current Protection, Overcharge Protection, Reverse Connection Protection. Abs material shell design: anti-fall & Durable Overall Design, Achieve the Longest Product Service Lifetime.

Enhanced heat sink: high-quality aluminum alloy heat sink, Simple & Easy Button Operation 2, super efficient heat dissipation, the thickest Part can Reach to 0.12 in. High charging ability: large power 80 amp solar charge controller, 48v/1920w24v, max PV Array input Voltage/Power Battery Voltage: 24V/960W12V, 12v/24v auto identification, 5v usb output, Get Free Battery Monitor in the Package.
BrandHZRE #ad
ManufacturerHZRE #ad

5. EpRec

#ad

And Flooded Batteries, EpRec Solar Charge Controller 10A 12V/24V Solar Panel Charge Controller with USB Port LCD Display,Compatible with Sealed, Gel

#ad
EpRec #ad - Rated discharge current: 10a; usb output voltage: 5v/3a; battery voltage: 12v/24v auto. Mutiple electric protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection.

Adjustable power rate with dual usb ports; 3-StageBulk, ABS, Float charge management and 4-Stage PWM charge. 12 months honor warranty from EpRec. Warranty only against products from EpRec. Functionality: equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management. Good heat dissipation: dual mosfet reverse current protection, low heat productionALL electronic components generate heat when they are running, it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place.

Please notice the controller might be power off if the battery voltage is too low. Easy to use: comes with a display that can clearly indicate the status and data, industrial, suitable for home, it can be conveniently switched modes and parameter configuration, commercial etc.
BrandEpRec #ad
ManufacturerEpRec #ad
Height1.6 Inches
Length5 Inches
Width2 Inches

6. Renogy

#ad

100W 30A PWM Controller, Renogy Solar Panel kit KIT-STARTER-100D

#ad
Renogy #ad - And it supports 3 types of batteries: lithium batteries, lead-acid batteries, gel batteries. Easy installation pre-drilled holes and plug&Play cables on the back allow for fast mounting. Corrosion-resistant aluminum frame for outdoor use, allowing the panels to last for decades as well as withstand high winds 2400Pa and snow loads 5400Pa.

Warranty 5 year warranty and 24/7 technical support team, contact us through Amazon whatever any questions or concerns you have. Wide application 400wh daily output depends on the 4 hours sunlight availability. This panel is suited for applications that require a smaller footprint, campers, making it a favorite for those with RVs, and more!.

Multiple protection renogy wanderer-li is a 30a pwm solar charge controller that integrates efficient PWM charging to increase battery life and improve system performance. It can prevent the battery from over charge, discharge and short circuit, over voltage, reversed polarity protection. Excellent performance 21% high solar cell efficiency.
BrandRenogy #ad
Manufacturerrenogy #ad
Height20.87 Inches
Length47.01 Inches
Weight19.84 Pounds
Width1.5 Inches
Part NumberKIT-STARTER-100D
ModelKIT-STARTER-100D
WarrantyPower Output Warranty

7. GHB

#ad

GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Solar Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation

#ad
GHB #ad - Available for DC lamp and phone charging. Protection functions: overload and short circuit protection, Lightning protection, Over-charging protection, Reverse Polarity protection. To connect your load and the cables with the right polarity and then connect with the load output port of the controller. Lcd screen display: this solar panel charger controller with lcd to display all parameters, more modern and more power-efficient.

Please correctly connect the positive and negative terminals, display better, more beautiful, the users can intuitively know the working condition of the controller. The battery indicator light on the controller will be on if successfully connected, intelligent control, to check and reconnect. Rated discharge current : 20a; usb output voltage: 5v; usb output current: 1. 5a; dc output voltage: 12v-24v, dc output Current: 20A. The lcd display is with built-in energy-saving backlight LCD, the LCD has rich contents, more clear, makes sure all terminals are connected tightly.

Pay special attention to + - polarity to avoid reversed connection, otherwise, your load may be damaged. Use pwm&wpc mode, under-voltage protection, improve system efficiency and prolong the life span of the battery. Power-efficient: microcontroller digital accuracy, will stop charging, when the battery was a full charge, it will be slow flashed, the arrow between the panel icon and the battery icon will flashe fastly, when it's charging, the function of the controller is to protect the voltage overshoot and discharge.
BrandGHB #ad
ManufacturerSmile&Satisfaction #ad
Height1.18 Inches
Length5.12 Inches
Width3.94 Inches
Part NumberCMG-2420
ModelCMG-2420

8. Saooer

#ad

30A Solar Charge Controller,MPPT Solar Charger Controller, 12V/24V Solar Panel Intelligent Regulator with Dual USB Port and PWM LCD Display

#ad
Saooer #ad - Smart lcd display shows the charging status and battery status to make you more assured of charging. Safety chargingadopt abs flame-retardant shell, solid and durable, over-current, corrosion resistant, overcharging, fireproof, Built in circuit protection guards against reverse polarity, electric shock, sparks, open-circuits, short-circuits and overheating.

Lcd displaycomes with a display that can clearly indicate the status and data, solar charger can be conveniently switched modes and parameter configuration. Battery typefor protecting the lifespan of your battery, once the voltage of the battery out of range, the solar controller will turn off automatically. Solar charge controllerthe solar charger controller compatibility with 12V 24V system.

Dual usb, build-in industrial micro controller, to support mobile phone chargeing. Easy to usecharge controllers for solar panels should connect the battery first, industrial, and finally the load. Lcd display, suitable for home, adjustable parameter, then the solar panel, commercial etc. Discharge current is 30A, automatically manage the working of solar panel and battery in solar system.
BrandSaooer #ad
ManufacturerSaooer #ad
Height2.17 Inches
Length7.48 Inches
Width3.94 Inches

9. EEEKit

#ad

EEEKit 30A Solar Charge Controller, Multi-Function Adjustable LCD Display with Dual USB Port Timer Setting PWM Auto Parameter, Solar Panel Charger Controller 12V/24V

#ad
EEEKit #ad - Dual usb 5v/3a output ports support mobile phones, AGM, tablet PCs or other devices that require 5V voltage. Intelligentbuild-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out.

The solar controller will turn off automatically once the voltage is too low. Easy to usethe charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation. Functional lcd displayintuitive lcd display that can clearly indicate the status and data is able to switch modes and parameter configuration, commercial, suitable for home, industrial, etc.

Reliable protectioneeekit solar charge regulator provides over-current protection, low voltage and overcharge protection, short-circuit protection, inverse connection protection, a reliable protector for your devices. Wide compatibilitythe solar charger controller with 30a rated discharge current is compatible with 12V or 24V system automatically, suitable for lead-acid batteries: OPEN, GEL.
BrandEEEKit #ad
ManufacturerEEEKit #ad
Height2.5 Inches
Length7 Inches
Width13.5 Inches
Part NumberH026100-E008135338

10. Renogy

#ad

Renogy Rover 40 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery

#ad
Renogy #ad - Automatically detect 12v or 24v dc system voltages Innovative MPPT technology with high tracking efficiency up to 99% and peak Conversion efficiency of 98%. Compatible with various deep cycle battery options: sealed, and short circuit reverse protection: Any combination of solar module and battery, Float, overload, over-discharging, boost, and Lithium Electronic protection: Overcharging, Flooded, without causing damage to any component 4-stage charging: Bulk, gel, and Equalization and LCD screen with programmable charging parameters.

Die-cast aluminum design for heat dissipation and The capability of measuring the battery's temperature and remote monitoring Customizable charging voltages.

Rs232 port allows the rover to communicate with the BT-1 Bluetooth module, which can pair with the Renogy DC Home smart phone app. Charges over-discharged lithium-ion batteries Error code detection for easy self diagnoses.
BrandRenogy #ad
ManufacturerRenogy #ad
Height2.85 Inches
Length6.81 Inches
Weight2.4 Pounds
Width9.37 Inches
Part NumberRNG-CTRL-RVR40
ModelRNG-CTRL-RVR40
Warranty2-year material warranty