As an Amazon Associate I earn from qualifying purchases.
1. M MINGLE #ad
3/8 Inch, Soap Injector, M MINGLE Adjustable Chemical Injector Kit for Pressure Washer #adM MINGLE #ad
- Soap injector has universal 3/8’’ quick disconnect. Great for cleaning or spraying. Pressure washer downstream chemical injector kit includes chemical injector, 10 feet tubing siphon hose, filter and black soap nozzle.
Control metering valve to adjust dilution ratio of chemical and water. It connects between pressure washer pump and hose. Used to siphon detergent out of separate container.
Attention: max pressure is 3200 psi. Works with most brands of gas and electric pressure washer, cold and hot water pressure washer. Chemical-resist and poly strainer reduces injector clogging. Flow rate is from 2 gpm to 5 gpm. The chemical or soap runs after pump, which will not damage pump.
2. GreenWorks #ad
Greenworks High Pressure Soap Applicator 51362 #adGreenWorks #ad
- Quick connection. Easy on and off dial. Compatible with all greenworks pressure Washers. 1. 4 gpm maximum water flow. 1/4 in. Note:product might contain water/residue as a results of quality testing which does not affect the performance of the item.
Max water temperature of 40 Degree. Compatible with power washers up to 3100PSI Maximum Pressure.
3. Raincovo #ad
Power Washer Chemical Injector Kit, Soap Injector, Raincovo Downstream Injector for Pressure Washer, 4000 PSI, 3/8 Inch Quick Connect #adRaincovo #ad
- Application: when detergent is sucked out separately, the chemical will not pass through the pump, you could use a variety of chemicals without damaging the pump.
Connector: downstream injector has 3/8 inch quick connect. Max pressure is 4000 PSI. Fits most electric and gas power washer. Flow rate is 2 to 5 GPM. Package: kit includes chemical injector, 10 feet siphon hose, filter, black nozzle soap with 1/4” quick connect and teflon tape.
Characteristic: chemical injector kit with a metering valve, which can adjust dilution ratio of soap and water. Material: siphon hose is made of high-quality pvc, used for hot and cold water. Avoid clogging of the injector and improve the efficiency of pressure washer. Adapter is made of brass and stainless steel.
4. Tempono #ad
Power Washer Chemical Injector Kit, Tempono Pressure Washer Soap Injector, 3/8 Inch Quick Connect, Downstream Injector for Pressure Washer, 4000 PSI #adTempono #ad
- Siphon hose is made of high-quality PVC, suitable for hot and cold water. Chemical injector kit has 10 ft tube, filter, soap injector, nozzle and teflon tape.
Max pressure is up to 4000 PSI. You can control the concentration of the liquid. Protect the performance of the pump and extend its service life. The coupler is made of stainless steel and brass, sturdy and durable.
Flow rate is 2 to 5 GPM. Pressure chemical injector ensures that chemicals do not pass through the pump. Chemical injector has an metering valve. Please pay attention to mark of arrow direction on injector, do not install it backwards. Downstream injector for pressure washer with 3/8 inch quick connector.
5. Sooprinse #ad
Sooprinse Chemical Injector Kit for High Pressure Washer, 3/8 Inch Quick Connect, 4000 PSI Adjustable Soap Dispenser with a 1/4 Inch Black Soap Nozzle and Teflon Tape,16 Ft Siphon Hose #adSooprinse #ad
- Premium qualitymade of tough brass and stainless steel, resistant to corrosion and fading. Scientific designthe soap dispenser kit is equipped with a screw-in valve that adjusts the dilution ratio of chemicals and water to increase the efficiency of your high pressure washers.
Kit packagethe chemical injector kit includes chemical injector, 16 feet tubing siphon hose, filter and 1/4 inch quick connect black soap nozzle which connect to your gun or wand.
Flow arrows marks on the injector and do not install it backwards. Quality assurancewith in 3 years product warranty. 100% satisfaction guaranteed! please feel free to contact with us. Our professional after-sales team is at your service. Instructioin manualthe maximum pressure is 4000 PSI.
6. STYDDI #ad
STYDDI Foam Cannon with 1/4" Quick Connector for Pressure Washer, 1 Liter, Car Foam Lance Blaster Soap Dispenser with 5 Nozzle Tips for Power Washer #adSTYDDI #ad
- Easy to install and use - filling the bottle with desired amount of soap or shampoo and water, then it is ready for use. Universal snow foam cannon with 1/4" quick connect fitting suitable for almost all pressure washer - STYDDI pressure washer accessories set includes a snow foam cannon and five different pressure washer nozzle tips.
This adjustable snow foam cannon is equipped with a 1/4-inch quick connect fitting which is compatible with a wide range of pressure washer units on the market, and a 1-liter solution bottle for storing soap liquid. Shake to mix the liquid thoroughly and directly attach the 1/4" quick connect plug to the pressure washer gun, but also reduces the risk of scratching the car's paint.
Using the foam cannon to produce plentiful, caravans, facades, then remove the cannon and using the nozzle tips to spray water to wash away the foam and dirt. Five different spray nozzle tips - the included nozzle tips allow you to choose between five spray angles: red one 0°, white one 40°, black one 65°.
Using this snow foam cannon no only saves your time and energy, then connect the bottle to the nozzle. It can be used for all surfaces, paths, mud and dirty on the surface, driveways glass, walls, windows, thick and high-dense foam to quickly soften the stubborn stains, garden furniture, stairways, terraces, such as vehicles, stone etc. The control knob on top allows you to change the volume of foam while the nozzle provides you the ability to change the foam spray pattern. They will meet all your need in different situation, cleaning car and so on. A complete set for wide range of applications – it is a complete set of wash tools.
7. Tool Daily #ad
3/8 Inch Quick Connect, Tool Daily Adjustable Soap Chemical Injector for Pressure Washer #adTool Daily #ad
- The chemical runs after pump. Application: must follow manual to set up chemical Injector. Dilution ratio of chemical vs water can been adjusted by controlling metering valve.
The presure which is higher than 3200 PSI will not work. It is used to siphon detergent out of separate container. Attention: working pressure is 1000 to 3200 psi. So it allows for a wider choice of chemicals.
Works with most brands of gas and electric pressure washer. Suitable for cold and hot water pressure washer. Flow rate is from 1. 5 gpm to 4 gpm. Power washer chemical injector kit includes chemical injector, 10 Feet tubing, filter and black soap nozzle. It connects pressure washer pump to hose. Chemical injector has standard 3/8’’ quick connect fitting.
8. FUNTECK #ad
FUNTECK Pressure Washer Chemical Injector Kit Adjustable Soap Dispenser, 10 FT Siphon Hose, 3/8 inch Quick Connect, Come with a Black Soap Nozzle and Teflon Tape #adFUNTECK #ad
- Note: if your power washer or hose has m22 or 1/4” connections, please purchase a coupler adapter individually. It fits between a 3/8" pump outlet and 3/8" high pressure hose.
The pressure washer chemical injector kit has a 10 ft of siphon hose with filter that goes into the chemical container, which allows you to use a wide variety of chemicals without harming your pump. Pay attention to the direction-of-flow arrow on the injector and do not install it backwards.
The soap dispenser kit features a screw-in valve which allows you to adjust the dilution ratio and increases your pressure washer's effectiveness. Solid construction – made of brass and stainless steel, the downstream injector is heavy duty to last a long time. This pressure washer soap injector kit works with any pressure washer 1500-3200 PSI with 3/8. Inch quick connection fittings.
9. DUSICHIN #ad
DUSICHIN DUS-009 Snow Foam Cannon Foam Lance Pressure Washer Soap Dispenser Spray Gun Jet Wash Quick Release Adjustable Nozzle Larger Container Higher Flow Rate 55 Oz #adDUSICHIN #ad
- Adjustable snow foam lance, foam cannon with 1/4" quick disconnection fitting, Capacity: 55 Oz. All the connectors are made of quality brass and steel.
Water sprayer 3000 psi high pressure water gun, brass fitting M22-14 Thread, 1/4 inch outlet quick disconnect fitting. Adjustable spray nozzle for accurate mixing and foam generation, adjust the nozzle to get a proper spray pattern wide to narrow, adjust the knob on the top to control how much water is mixed in and the thickness of the foam spray.
Your satisfaction is priority for us, If you have any questions, please let us know. We will try our best to solve it.
10. Tool Daily #ad
5 Pressure Washer Nozzle Tips, Tool Daily Foam Cannon with 1/4 Inch Quick Connector, 1 Liter #adTool Daily #ad
- Adjustable snow foam lance with 1/4" quick disconnection fitting. Specification: 1000 pSI to 3000 PSI. The knob adjusts the foam dispensing amount and the nozzle adjusts the sprinkle pattern. Easy to install: fill some soap into the bottle with warm water to get thick foam; Then connect 1/4" quick connection plug to Pressure Washer Gun or Wand.
Application: ideal for motorcycle, windows washing, car washing; Roofs, Siding washing; floors, Driveways, it is best product for Detailing Trucks or SUVs.5
5 nozzle tips have different angle 0, 15, 40, 25, 65 degree. Such as watering flowers and plants, washing car. Container capacity: 1 Liter / 022 gallon.
Adjustable nozzle for accurate mixing and foam generation. Turn the top knob right - to get the thickest mixture, adjust the nozzle to get a proper sprinkle pattern, and let it loose. Finally, adjust the knob on the top to desired foam level and then Foam Blaster will disperse thick foam. Choose different nozzle according to the actual need. They also can be attached to a Quick-Connect Wand for swifter application and more.