Top 10 Flush Mount Solar Charge Controller – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Renogy

#ad

Gel, Flooded and Lithium Batteries, Compatible with Sealed, Renogy Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display

#adRenogy #ad - Compatible with 12v and 24v system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready. The adventurer is a negative ground controller. Intelligent protection against: reverse polarity, overcharging, Boost, short-circuit and reverse current.

Designed to cleanly flush mount on walls, providing a sleek, integrated look. Backlit lcd screen for displaying operating information and error codes. Rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy DC Home smartphone app. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding.

5v 2. Smart 4 stage pwm charging bulk, float and equalization and temperature compensation increases battery life and improves system performance. Any negative connection on the solar module, battery and load can be safely earth grounded as required. An included surface Mount Attachment allows for versatility in mounting. 4a usb port on the front display can be used to charge mobile phones, speakers, tablets, etc.

Brand	Renogy #ad
Manufacturer	Renogy #ad
Height	1.9 Inches
Length	6.56 Inches
Weight	0.6 Pounds
Width	4.5 Inches
Part Number	RNG-CTRL-ADV30-LI
Model	Adventurer 30A Li 12V/24V
Warranty	NEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.

2. Go Power!

#ad

Digital, Go Power! By Valterra GP-PWM-30-UL Solar Controller, 30A

#adGo Power! #ad - Pulse width Modulation PWM charging. Built-in USB charge port. 12 volt flush mounted pV charge controller rated for a continuous solar current input of 30 amps. Unique four stage charging system with optional equalize setting, to charge and protect your battery bank. Lcd digital display that shows solar array charge current, system battery voltage and battery capacity.

Brand	Go Power! #ad
Manufacturer	Go Power! #ad
Height	4.5 Inches
Length	8.25 Inches
Width	1.75 Inches
Part Number	GP-PWM-30-UL
Model	GP-PWM-30-UL

3. RICH SOLAR

#ad

RICH SOLAR 30A 12V/24V PWM Flush Mount Solar Charge Controller w/LCD Display

#adRICH SOLAR #ad - Digital lcd monitor for informative display of operational parameters and fault messages. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding.

Any negative connection on the solar module, battery and load can be safely earth grounded as required. 3-stage intelligent pwm charging: Bulk, Boost/Equalize, Float AL 22:14. Rs485 communication port with modbus protocol, Cloud platform software, and short circuit protection for 5V/200mA power supply, multiple peripherals: PC software, APP, etc. Negative ground controller. Compatible with 12v and 24v system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready.

Brand	RICH SOLAR #ad
Manufacturer	RICH SOLAR #ad

4. Renogy

#ad

Renogy 100 Watt 12 Volt Extremely Flexible Monocrystalline Solar Panel & Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display

#adRenogy #ad - Product 2: the adventurer is a negative ground controller. The lightweight design also contributes to lower mpg on vehicles. Intelligent protection against: reverse polarity, overcharging, Boost, short-circuit and reverse current. Product 2: compatible with 12v and 24V system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready.

Etfe material also has antifouling and self-cleaning abilities, ensure best performance day after day. Product 1: etfe material has higher light transmittance, longer service life than PET material. Product 2: smart 4 stage pwm charging bulk, float and Equalization and temperature compensation increases battery life and improves system performance. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. 5v 2. 4a usb port on the front display can be used to charge mobile phones, tablets, speakers, etc. Product 1: sleek and barely noticeable, the renogy 100W flexible solar panel laid flat is only a tenth of an inch tall! Approximately 95% thinner than its rigid counterpart, this panel is ideal for a stealthy solar setup.

Product 1: thanks to advanced polymer materials, this product weighs 70% less than conventional solar panels, making transportation and installation a breeze. Product 1: with a flex range of up to 248 degrees, this panel is capable of meeting a wide range of applications where standard panels can be inconvenient to mount, such as on the curved roof of an airstream. Rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app.

Brand

Renogy #ad

5. WindyNation

#ad

WindyNation P30LF Flush Mount 30A Solar Charge Controller with LCD Display and Battery Temperature Sensor

#adWindyNation #ad - Compatible with AGM, and Gel batteries. The p30lf is a flush mount charge controller. This means it is designed to be seamlessly mounted onto a flat wall surface, producing a professional, clean, and integrated look.

The p30lf flush mount controller is negative ground controller compatible with 12 Volt and 24 Volt batteries. This delivers a prolonged battery life. Features the following safety and protection features: overcharging and discharging if load is connected, overload, reverse polarity, and short-circuit. Utilizes a best in class four stage charging Bulk, Flooded, Boost, Float, Equalize algorithm to achieve optimal battery performance and longevity. Included battery temperature sensor BTS provides optimal charging based on battery temperature.

Brand	WindyNation #ad
Manufacturer	WindyNation #ad
Part Number	CHC-LCD-30FM
Model	CHC-LCD-30FM

6. EPEVER

#ad

And Flooded Battery, EPEVER Solar Charge Controller 30A PWM Solar Panel Regulator Flush Mount 12V/24V Max Input 360W/720W Negative Ground for Sealed, Gel

#adEPEVER #ad - Automatic cycle interface: PV voltage, PV power, Battery voltage and Battery temperature. It’s compatible with 12v/24v photovoltaic systems and can be applied to any off-grid solar system such as Recreation vehicles RVs, solar boats, etc. This solar charge regulator compatible with sealed, and Flooded batteries.

Rs485 communication port with modbus protocol, short-circuit, overload, and short circuit protection for 5V/200mA power supply. Gm3024n is a flush mounted 30 amp negative-ground solar charge controller regulator max solar panel Input 360W/720W, mobile service vehicles, equipped with Pulse Width Modulated PWM charging mode. Control parameters are fully programmable with a variety of methods including PC software, Mobile app, Bluetooth module, and Wi-Fi module as well.

Negative-ground charge controller. 30a solar controller real-time operating information and data are displayed on LCD. Protection against: overcharging, and reverse polarity. Prevents batteries from over-charging and over-discharging. 3-stage intelligent pwm charging: Bulk, Gel, Boost / Equalize and Float. Compensates for temperature, pv current, rated charging current at working temperature without de-rating.

Brand	EPEVER #ad
Manufacturer	EPEVER #ad
Height	1.9 Inches
Length	7.03 Inches
Width	4.15 Inches

7. wosume

#ad

Wosume 30A Flush Mount Solar Charge Controller, Solar Charger Controller Embedded Voltage Regulator with 2Pcs Connectors 12V/24V

#adwosume #ad - High quality and low failure rate components S-T / IR to ensure product life. With real-time energy statistics, battery temperature compensation, With extensive electronic protection. Digital lcd monitor for displaying operating parameters and fault information, Can monitor and set parameters through PC software or APP. Level 3 smart pwm charging: batch, boost/balance and floating, short circuit protection, RS485 communication port, suitable for 5V / 200mA power supply. Embedded installation design, easy to install and remove.

Brand	wosume #ad
Manufacturer	Wosume #ad
Height	2.36 Inches
Length	8.27 Inches
Weight	0.93 Pounds
Width	4.72 Inches
Part Number	Wosumevwnaze5r90

8. Jadpes

#ad

Solar Controller 12V/24V Intelligent Solar Charge Controller with Digital Display Flush Mount Charge ControllerST-F 12V30A, Jadpes Solar Charge Controller

#adJadpes #ad - High quality, waterproof PWM solar charge controller, ideal for extreme environments. Efficient digital PWM charging helps protect battery life. Electronic protection features, overcharging, overload, overdischarging, short circuit and reverse protection of solar modules. The load power output can be configured to automatically recognize day and night, so solar lighting can be turned on automatically at dusk. Ip67, waterproof, suitable for outdoor and marine use.

Brand	Jadpes #ad
Manufacturer	Jadpes #ad
Height	0.39 Inches
Length	0.39 Inches
Weight	0.44 Pounds
Width	0.39 Inches
Part Number	Jadpeswx8gq2z9pa-01

9. AIMS Power

#ad

AIMS Power Flush Mount 10 Amp Solar Charge Controller 12/24V PWM

#adAIMS Power #ad - Lcd displays key information such as battery voltage, solar panel voltage, solar panel charging current and load discharging current.

Supported with a 2-year warranty from AIMS Power when purchased from authorized resellers. Protections: overload, high voltage, short circuit, high temperature, low voltage and auto correct. Uses the latest pwm charging technology and state of charge monitoring, adjusts charging based on battery voltage prolonging overall battery life. Small and compact ideal for small areas. Works with 12 and 24 volt battery systems. Pv input, battery output ports DC load port on 10amp.

Brand	AIMS Power #ad
Manufacturer	AIMS POWER #ad
Weight	1 Pounds
Part Number	SCC10AFM
Warranty	1 Year Manufacturers Warranty with AIMS Power (Must purchase from authorized reseller)

10. Blue Sky Energy

#ad

Blue Sky Energy SB3000i Solar Boost 30A MPPT Charge Controller with Display, Fully programmable for Lead-Acid or Lithium Batteries. Auxiliary Output for Dual Battery Charge or 20A LVD Load Output

#adBlue Sky Energy #ad - Recommended panel voc at stc 40v max voltage input 50V. Perfect for rvs and marine, Flush mounting, and real-time data through the onboard display.

Fully programmable multi-stage charge profile for Lead-Acid and Lithium batteries through the onboard display. Max. Auxiliary output programmed for max 20A with LVD or for 2A maintaining of a secondary battery. Mppt solar charge controller for 12v-nominal battery pb or Li, charge current 30A with 36-cell panels max 400W or 22A with 60-cell panel max 290W. 5-year warranty, made in the usa, ce/fcc/roHS certifications. Datasheet in “Product Information” below.

Brand	Blue Sky Energy #ad
Manufacturer	Blue Sky Energy #ad
Height	2.5 Inches
Length	6.5 Inches
Weight	1.09 Pounds
Width	4.75 Inches
Part Number	CCTLR-BS-MPP-030A
Model	CCTLR-BS-MPP-030A
Warranty	5 year limited warranty