Top 10 Drip Irrigation Tee 1/2 – Automatic Drip Irrigation Kits

As an Amazon Associate I earn from qualifying purchases.

1. JOYPRO

#ad

Drip Tees 17mm Irrigation Tubing Connectors for Drip Sprinkler Garden Lawn Systems, JOYPRO 24 Pieces Drip Irrigation Barbed Tee Fittings for 1/2” Tubing 0.600”ID

#ad
JOYPRO #ad - Made of durable plastic materialjorpro drip line tees are made of high quality engineering plastics, strong, water resistant, so our irrigation tee connectors are durable, chemical-resistant and long-lasting than others.

Package listit comes with 24 pieces barbed tee connectors, which let you connect your irrigation systems as you wish. Wide applicationthese tee fittings for 1/2 inch sprinkler hose is ideal for garden, farm, greenhouse, flower bed, lawn, patio and other agricultural watering system. Directly insert this irrigation tubing tee at the ends of the water pipe, the barbed ends can grab 1/2" tubing tightly for a secure leak-proof connection.

Perfect match 1/2 inch irrigation tubingjoypro 1/2 inch irrigation tee fittings can connect to most of the standard 1/2" drip irrigation tubing from 0560 to 0600 inside Diameter ID. Easy to installit is easy to install without any glue, tools or clamps. Note: please check the size of tubing carefully before purchasing.
BrandJOYPRO #ad
ManufactureriRunning #ad

2. One Stop Outdoor

#ad

One Stop Outdoor 20-Pack, Barbed Connectors Fits Most Brands, Rain Bird 16mm .520 ID and Compatible Drip or Sprinkler Systems Tee 20-Pack, Irrigation Fittings Tee for 1/2" Drip Tubing

#ad
One Stop Outdoor #ad - If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting. Simply push the tubing firmly over the barbs for a very tight fit that won't leak.

Please note* - to prevent leaks or blowouts please ensure that the incoming pressure does not exceed 30PSI. 20-piece tees - three-way connector. High impact Plastic Construction. Secure and easy installation without glue, tools, or clamps. Fits all major brands of tubing 1/2", 16mm - Approximately. 520 id range. Easy install - use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. Simple to install. These fittings are designed to fit 1/2" Inch, 16mm drip tubing. 520 id, if the tubing you are using is larger it can cause leaks! 99% of all leaks and blowouts are caused by pressure issues or tubing size issues.
BrandOne Stop Outdoor #ad
ManufacturerOne Stop Outdoor #ad

3. Arfun

#ad

Fits of 1/2”, 17mm .600” ID Drip Tubing, Arfun 20-Pack Drip Irrigation Barbed Tee Fittings

#ad
Arfun #ad - Package included:20 pieces of barbed tee connectors for 1/2’’ drip irrigation tubing. Durable plastic material:made of long-lasting plastic material, this 1/2 inch drip irrigation tee won’t deform or break easily and assures more durable life.

Easy installation:easy to install without glue, tools or clamps. Barbed ends grab 1/2’’ tubing tightly for a secure leak-proof connection. Tips: heating the end of hose to help it easily connect with these drip tee. Fits 1/2 inch irrigation tubing:these 17mm irrigation tees work with most of 1/2” drip tubing measuring from.

560 to. 600 inner diameter id, compatible with many brands of half inch tubing such as Rainbird, Orbit, Dig and Toro. Wide application:this 1/2" barbed tee fitting connects your irrigation system easily and securely, flower bed, it is ideal to be applied for garden, greenhouse, patio and other agricultural watering system.
BrandArfun #ad
ManufacturerArfun #ad
Part NumberPD-4606

4. One Stop Outdoor

#ad

Tee, One Stop Outdoor 10-Pack Drip Irrigation 3-Way Tee 1/2" Universal Perma Connector Barbed Locking Fitting for Drip Tubing, Fits All Brands 16-17mm Drip Tape AG Tubing 10

#ad
One Stop Outdoor #ad - Incoming pressure: 30 PSI. Allows creation of a custom layout for your planting area. Locking fit: barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time! Universal fit: fits all brands 16 & 17mm Drip Tubing! Material: constructed of highly durable UV and chemical-resistant materials to assure long life. Use: connect and configure drip irrigation tubing to your desired layout.
BrandOne Stop Outdoor #ad
ManufacturerOne Stop Outdoor #ad
Height3 Inches
Length5 Inches
Width6.5 Inches

5. Dig

#ad

Bag of 20, DIG Corporation 1/2" compression tee, drip irrigation fitting .700 OD

#ad
Dig #ad - Color coded. Secure and easy installation without glues or clamps. High impact plastic. Uv-resistant. Operating pressure: 10 to 30 PSI.
BrandDig #ad
ManufacturerDIG Corporation #ad
Height4.72 Inches
Length9.09 Inches
Weight1.21 Pounds
Width7.95 Inches
Part Number15-006
Model15-006
WarrantyThree Years

6. Habitech

#ad

6 Tees, 6 End Cap Plugs, 20 Piece Set, Habitech Irrigation Fittings Kit for 1/2" Tubing, Barbed Connectors For Rain Bird And Compatible Drip or Sprinkler Systems, 2 Elbows, 6 Couplings

#ad
Habitech #ad - This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6 tubing end cap closures. Easy and secure installation without glue, tools, or clamps. Ideal for use with raised garden beds, farm, residential, greenhouse gardening and agricultural watering applications.

The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting. Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. These 17mm drip fittings are made with long-lasting and environmentaly-friendly regrind tubing plastic. These 17mm barbed fittings work with half inch drip tubing from 0560 to 0600 inside Diameter ID.

Keep extra parts handy for irrigation repair or expansion. Compatible with many types of rainbird, Orbit, Dig and Toro tubing as well as generic 1/2" blank tubing or drip lines. Save money and time buying everything you need at once in this 20-piece Set. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting. Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system.
BrandHabitech #ad
ManufacturerHabitech #ad
Part Number4336408901
Model4336408901

7. Rain Bird

#ad

Rain Bird BT50/4PK Drip Irrigation 1/2" Barbed Tee Fitting, 4-Pack x 2

#ad
Rain Bird #ad - 8 total tees 2 Four Packs. Barbed ends grab tubing for a secure leak-proof connection. Allows creation of a custom layout for your planting area. Connector for use with 1/2" drip irrigation tubing.
BrandRain Bird #ad
ManufacturerRain Bird #ad
Height1 Inches
Length5 Inches
Width7 Inches
Part Number4336408908
Model4336408908

8. Boao

#ad

7 Couplings, 7 Elbows and 7 End Cap Plugs Drip Irrigation Barbed Connectors for Compatible Drip or Sprinkler Systems, 28 Pieces Drip Irrigation Fittings Kit 1/2 Inch Tubing Set Including 7 Tees

#ad
Boao #ad - Application: these 16 mm or 17 mm barbed fittings work with half inch drip tubing whose inside diameter is from 0560 to 0600; compatible with many types of tubing as well as 1/2 inch blank tubing or drip lines, fit for garden greenhouse, flower bed, patio and lawn.

Quick and simple to install: these hose connectors are easy to mount without any additional tools, which is a helpful solution for both indoor appliances and outdoor garden use, and provide effective, lasting and watertight connections for your hose system. Package includes: 7 pieces tees, 7 pieces elbows, 7 pieces couplings, 7 pieces end cap plugs; A total of 28 pieces to meet your long-term needs.

28 pieces set: you can save time and obtain everything you need one time; Starting your drip irrigation system installation with this set of essential components for building a maintenance-free drip system. Long-lasting: these 16 mm or 17 mm drip fittings are made with durable tubing plastic, resistant to sun exposure and chemical corrosion.
BrandBoao #ad
ManufacturerBoao #ad
Height1.57 Inches
Length7.87 Inches
Width5.51 Inches

9. Rain Bird

#ad

Rain Bird EFT25-1PS Easy Fit Tube Tee, Universal, Black

#ad
Rain Bird #ad - Requires 50% less force than competitor’s compression fittings. Universal tee fitting quickly connects three lengths of 1/2" Drip tubing in a "T" shape. Recommended operating pressure: 0 to 60 PSI. Constructed of highly durable UV and chemical-resistant materials to assure long life. Compatible with all 1/2" drip irrigation tubing measuring from. 580" to. 700" outside diameter. Quick easy Fit push-together assembly speeds installation.
BrandRain Bird #ad
ManufacturerRain Bird #ad
Height16.88 Inches
Length5.5 Inches
Weight0.1 Pounds
Width6.25 Inches
Part NumberEFT25-1PS
ModelEFT25-1PS

10. B&A

#ad

B&A 14 Pieces Drip Irrigation Tubing Connector 1/2 Inch Universal Adapter Drip Tubing Fittings Connector Barbed Locking Fitting Fits All Brands 16-17mm Drip Tape and Tubing

#ad
B&A #ad - Wide range of application: our irrigation joints are suitable for many occasions, gardens, etc. Such as agricultural irrigation, greenhouse gardening, suitable for most 16-17 mm drip irrigation pipes. Easy to use: no additional tools are required, just push the tube firmly onto the barb to install it securely without water leaks, so you can use these fittings to install or DIY your own drip tape and tubing.

Durable materials: these drip irrigation connectors are made of sturdy plastic, so they have a long service life, and can work continuously for many days, no leakage, which is convenient and practical. The twist lock adds additional fixing to the tubing to ensure a reliable connection every time.

Safe and leak-free: the leak-free design allows you to connect and configure the drip irrigation tube to the desired layout and allow you to create custom layouts for your planting area. The package includes: you will get 2 pieces of elbow joints, 4 pieces of coupling adapters and 4 pieces of end plug connectors, 2 pieces of 3-Way Tee adapters, 2 pieces of shut off valves connectors, the number is enough for your daily use and replacement.
BrandB&A #ad
ManufacturerBA #ad