Dries Clear – 25 ml – J-B Weld 50112 ClearWeld Quick-Setting Epoxy Syringe

#ad
#ad
J-B Weld 50112 #ad - Clearweld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. If temperature is below 40 degrees Fahrenheit, then set time is longer. J-b weld is proudly made in the USA Crystal clear epoxy sets in 5 minutes and cures in 1 hour. Cures in 1 hour. Mix: after removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.

3. With a tensile strength of 4400 PSI, ClearWeld sets to a hard, permanent bond. Use on:automotivebrickceramicCloth/CarpetConcreteEpoxy and AdhesivesFiberglassGlassPlastic/Composite/PVCAnd moreInstructions1. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.

Dries Clear - 25 ml - J-B Weld 50112 ClearWeld Quick-Setting Epoxy Syringe #ad - 2. Prepare: clean surface area of dirt, oil, grease, paint, or loose debris. Great for tile, ceramic, wood, most plastics, glass, metal and more. Tensile strength of 4400 PSI for a strong, permanent bond. J-b weld is proudly made in the USA. Dry: sets in 5 minutes. No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out.

More information about J-B Weld 50112 #ad

Dries Clear - J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - 25ml

#ad
#ad
J-B Weld 50101 #ad - Minuteweld is designed to adhere to multiple surfaces and can be used on ceramic, tile, stone, most plastics, glass, wood and metal. Use on:automotiveceramicCloth/CarpetEpoxy and AdhesivesFiberglassPlastic/Composite/PVCAnd moreInstructions1. Apply: apply with appropriate tool in an even coat, weld bead or extruded shape as needed.

4. J-b weld minuteweld syringeMinuteWeld is a special formulated, high-strength, two-part instant setting epoxy. If temperature is below 40 degrees Fahrenheit, then set time is longer. J-b weld is proudly made in the uSA Clear, instant setting two-part epoxy sets in 1 minute and cures in 1 hour. J-b weld is proudly made in the USA.

Dries Clear - J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - 25ml #ad - Mix: after removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly. 3. Minuteweld will set under most temperature conditions in one minute. No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.

More information about J-B Weld 50101 #ad


Similar products



J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Dries Black - 25 ml

#ad
#ad
J-B Weld 50139 #ad - Dry: sets in 15 minutes. Great for filling gaps, plastic to metal and plastic to plastic bonding. No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out. Great for tile, ceramic, most plastics, glass and more. Tensile strength of 2850 PSI for a strong, permanent bond.

Plastic bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets black in color and cures to a hard, permanent bond. Use on:automotiveceramicConcreteEpoxy and AdhesivesFiberglassPlastic/Composite/PVCAnd moreInstructions1.

J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Dries Black - 25 ml #ad - If temperature is below 40 degrees Fahrenheit, then set time is longer. J-b weld is proudly made in the uSA Clear, instant setting two-part epoxy sets in 1 minute and cures in 1 hour. Cures in 30 minutes. Apply: apply with appropriate tool in an even coat, weld bead or extruded shape as needed. 4. No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out.

J-b weld black plastic bonder syringeplastic bonder is a quick-setting, urethane adhesive system that provides strong and lasting repairs and works on thermoset, two-part, carbon fiber composites, thermoplastics, coated metals, concrete and more. Prepare: clean surface area of dirt, rust, paint, grease, oil, etc.

More information about J-B Weld 50139 #ad


Similar products



2 oz. - J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty

#ad
#ad
J-B Weld 8237 #ad - Plasticweld has a 20-25 minute work life; functional cure occurs in 2-3 hours. Great for tile, most plastics, ceramic, glass and more. Tensile strength of 2850 PSI for a strong, permanent bond. Rebuild automotive trim, fiberglass parts and vinyl siding. Superior strength. Does not adhere to polyethylene, polypropylene or some other plastics.

Great for filling gaps, plastic to metal and plastic to plastic bonding. J-b weld plasticweld epoxy puttyplasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. Black drying two-part body panel adhesive and gap filler sets in 15 minutes and cures in 30 minutes.

2 oz. - J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty #ad - No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out. Hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. Plasticweld cures to an off-white color, is rated at a tensile strength of 350 PSI. Cut:remove required amount of putty.

2. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. J-b weld is proudly made in the USA.

More information about J-B Weld 8237 #ad


Similar products



DSYJ Pack of 5 Clay Color Shaping Modeling Wipe Out Tools Rubber Tip Paint Brushes for Sculpture Pottery

#ad
#ad
BCP 12331000500 #ad - No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out. Black drying two-part body panel adhesive and gap filler sets in 15 minutes and cures in 30 minutes. Superior strength. Bcp pack of 5 clay color shaping modeling wipe out tools rubber tip paint brushes for sculpture PotteryBCP Pack of 5 Clay Color Shaping Modeling Wipe Out Tools Rubber Tip Paint Brushes for Sculpture PotteryManufactured by: BCP Clear, instant setting two-part epoxy sets in 1 minute and cures in 1 hour.

Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC. J-b weld is proudly made in the USA. Rebuild automotive trim, fiberglass parts and vinyl siding. Great for filling gaps, plastic to metal and plastic to plastic bonding. Hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types.

DSYJ Pack of 5 Clay Color Shaping Modeling Wipe Out Tools Rubber Tip Paint Brushes for Sculpture Pottery #ad - Tool set for color shaping, drawing, fine detail, blending, touch-up work and remove the fingerprints.1/4 inch width and 1/2 inch length soft tips, angle chisel, cup chisel, taper point, flat chisel, cup round.6 1/4 inch full length with wooden handle. Great for tile, most plastics, ceramic, glass and more.

Tensile strength of 2850 PSI for a strong, permanent bond.

More information about BCP 12331000500 #ad


Similar products



2 oz. - J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty Stick

#ad
#ad
J-B Weld 8267 #ad - Apply: press putty firmly to the surface to be repaired. J-b weld is proudly made in the uSA Clear, instant setting two-part epoxy sets in 1 minute and cures in 1 hour. Hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. Superior strength. Once cured, carved, it can be sawed, drilled, sanded and painted and is rated at a tensile strength of 350 PSI.

J-b weld is proudly made in the USA. Great for patching and repairing automotive and machine parts, plumbing, stripped threads and household repairs. Rebuild automotive trim, fiberglass parts and vinyl siding. J-b weld is proudly made in the USA. Will not shrink or pull away. Hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types.

2 oz. - J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty Stick #ad - Great for rigid and semi-flexible plastic, abs, pvc and cpvc pipes, automotive trim, bumpers and more. Sets in 25 minutes, cures off-white in 3 hours - does not adhere to polyethylene, polypropylene or some other plastics. Tensile strength of 3770 PSI for a strong, permanent bond. Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC.

J-b weld steelstik epoxy putty sticksteelStik is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal.

More information about J-B Weld 8267 #ad


Similar products



1 Lb, Pack of 3 - Original Sculpey Sculpturing Compound White Oven-Bake Clay - Great for School and Art Projects

#ad
#ad
Sculpey BHBU0503A1083 #ad - J-b weld is proudly made in the USA. Great for tile, most plastics, ceramic, glass and more. Tensile strength of 2850 PSI for a strong, permanent bond. Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC. It works and feels like ceramic clay, but it stays soft until it is baked.

No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out. J-b weld is proudly made in the USA. Three packs - the item is available in three 1 lb boxes. No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out. Tool set for color shaping, fine detail, blending, drawing, touch-up work and remove the fingerprints.

1 Lb, Pack of 3 - Original Sculpey Sculpturing Compound White Oven-Bake Clay - Great for School and Art Projects #ad - 1/4 inch width and 1/2 inch length soft tips, flat chisel, taper point, angle chisel, cup chisel, cup round.6 1/4 inch full length with wooden handle. When fully cured, steelstik has a tensile strength of 900 psi and will withstand temperatures of up to 300 degrees F. The original Sculpey oven-bake clay is soft and flexible.

Great for filling gaps, plastic to metal and plastic to plastic bonding. The sculpey Clay is excellent for school and art projects. Black drying two-part body panel adhesive and gap filler sets in 15 minutes and cures in 30 minutes.

More information about Sculpey BHBU0503A1083 #ad


Similar products



Dries Tan - J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - 25 ml

#ad
#ad
J-B Weld 50133 #ad - J-b weld is proudly made in the USA. If temperature is below 40 degrees Fahrenheit, then set time is longer. J-b weld is proudly made in the uSA Clear, instant setting two-part epoxy sets in 1 minute and cures in 1 hour. Dry: sets in 15 minutes. Great for tile, ceramic, most plastics, glass and more. Tensile strength of 2850 PSI for a strong, permanent bond.

Three packs - the item is available in three 1 lb boxes. Tool set for color shaping, drawing, fine detail, blending, touch-up work and remove the fingerprints.1/4 inch width and 1/2 inch length soft tips, taper point, angle chisel, flat chisel, cup chisel, cup round.6 1/4 inch full length with wooden handle.

Dries Tan - J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - 25 ml #ad - J-b weld is proudly made in the USA. When fully cured, steelstik has a tensile strength of 900 psi and will withstand temperatures of up to 300 degrees F. It is perfect for creating jewelry pieces, embellishments, and more. Original white - The clay is available in White. Great for filling dents, bumpers, polypropylene and polyethylene plastics, trim, fiberglass and more.

Tensile strength of 3770 PSI for a strong, permanent bond. Once cured, it can be sawed, carved, drilled, sanded and painted and is rated at a tensile strength of 350 PSI.

More information about J-B Weld 50133 #ad


Similar products



J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Dries Translucent Yellow - 25 ml

#ad
#ad
J-B Weld 50132 #ad - Stays soft until baked - the Original Sculpey is oven-bake clay that remains soft and flexible until it is baked. First oven-bake clay - the original Sculpey is America's first oven bake clay. Plasticweld will bond a variety of surfaces, such as metal, composites, fiberglass and others. J-b weld is proudly made in the USA.

Once cured, it can be sawed, carved, drilled, sanded and painted and is rated at a tensile strength of 350 PSI. J-b weld is proudly made in the USA. Black drying two-part body panel adhesive and gap filler sets in 15 minutes and cures in 30 minutes. J-b weld is proudly made in the USA. When fully cured, steelstik has a tensile strength of 900 psi and will withstand temperatures of up to 300 degrees F.

J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Dries Translucent Yellow - 25 ml #ad - Cures in 1 hour. No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out. Hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. Superior strength. Sets in 3-5 minutes and cures to a dark grey color in 1 hour. Tan drying two-part urethane adhesive sets in 15 minutes and cures in 30 minutes.

Tensile strength of 3770 PSI for a strong, permanent bond.

More information about J-B Weld 50132 #ad


Similar products



2 oz. - J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy

#ad
#ad
J-B Weld 8276 #ad - Great for filling gaps, plastic to metal and plastic to plastic bonding. J-b weld is proudly made in the USA. Tensile strength of 3770 PSI for a strong, permanent bond. J-b kwikweld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300 degrees F. Great for:household repairsAutomotivePlumbingMarineCrafts and MoreUse on:AutomotiveBrickConcreteFiberglassMetalAnd moreInstructions1.

When fully cured, steelstik has a tensile strength of 900 psi and will withstand temperatures of up to 300 degrees F. J-b weld is proudly made in the USA. Great for filling dents, polypropylene and polyethylene plastics, trim, bumpers, fiberglass and more. Tensile strength of 3770 PSI for a strong, permanent bond.

2 oz. - J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy #ad - After mixing, tapped, filed, it forms a permanent bond and can be shaped, sanded and drilled after curing. No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out. Fast setting version of The Original J-B Weld two-part epoxy cold weld system. Sets in 3-5 minutes and cures to a dark grey color in 1 hour.

It is perfect for creating jewelry pieces, embellishments, and more. Original white - The clay is available in White.

More information about J-B Weld 8276 #ad


Similar products



J-B Weld 8277 WaterWeld Epoxy Putty Stick - 2 oz.

#ad
#ad
J-B Weld 8277 #ad - No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out. Hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. Once cured it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled and will withstand temperatures of up to 300 degrees Fahrenheit.

J-b weld is proudly made in the USA. Bonds instantly. Sets in 3-5 minutes and cures to a dark grey color in 1 hour. No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out. Works on moist surfaces and under water. Rebuild automotive trim, fiberglass parts and vinyl siding.

J-B Weld 8277 WaterWeld Epoxy Putty Stick - 2 oz. #ad - Great for rigid and semi-flexible plastic, pvc and cpvc pipes, abs, automotive trim, bumpers and more. Sets in 25 minutes, cures off-white in 3 hours - does not adhere to polyethylene, polypropylene or some other plastics. Hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal.

After curing, tapped, it can be drilled, filed, sanded and painted. Ideal for repairing plumbing, pool and spa, drains, fuel tanks, tub and shower, boats and potable water tanks; setup occurs even under water. Mix: thoroughly knead putty with fingers to a uniform color.

More information about J-B Weld 8277 #ad


Similar products