AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner

#ad
#ad
Bitmain L3+ #ad - Power consumption: 800w ±10% at the wall with Bitmain's APW3 PSU, 93 percent efficiency, 25C ambient temp. Network connection: Ethernet cable not included. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. Built-in controller - No separate host computer required for operation.

Power supply sold separately. Antminer aPW3++ recommended. Noise level: Loud. Operating temperature: 0C to 40C. Chip quantity per unit: 288 x BM1485. Notes: 1. Power supply unit is not included. Power Efficiency: 1. 6 j/mh at the wall with Bitmain's APW3 PSU. 2. Not for desk-top use. Bitmain recommends the APW3++ power supply for the AntMiner L3+.

AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner #ad - In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return. Each antminer l3+ requires nine 6-pin pci-e connectors for 12v dc input must be very stable power supply There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller.

More information about Bitmain L3+ #ad

Tripp Lite Heavy-Duty Computer Power Cord 14AWG 15A NEMA 5-15P to IEC-320-C13 6-ft.P007-006

#ad
#ad
TRIPP LITE P007-006 #ad - Puse tripp lites p007-006 in server applications that require a higher rated, heavier gauge cable. Lifetime Warranty. 14 awg x 3c, sjt, 15a, 125 volt. Ul, rohs Compliant. C13 to 5-15p connectors, 3 x 14 awg conductors, 15A / 250V rating. P molded, heavy-duty Power Cable, 6 ft. Iec-60320-c13 to nema 5-15P.

More information about TRIPP LITE P007-006 #ad


Similar products



Switching Power Supply for Bitmain AntMiner L3+ S9 T9 Model Number: APW3++-12-1600-A3, Wide Voltage Design, 1200W / 1600W, 10 of 6-pin PCIe Connectors

#ad
#ad
BIT-CnTech APW3++-12-1600-A3 #ad - Molded, heavy-duty Power Cable, 6 ft. Iec-60320-c13 to nema 5-15P. Lifetime Warranty. 14 awg x 3c, sjt, 15a, 125 volt. Ul, rohs Compliant.

More information about BIT-CnTech APW3++-12-1600-A3 #ad


Similar products



Switching Power Supply for Bitmain AntMiner L3+ S9 T9 Model Number: APW3++-12-1600-A3, Wide Voltage Design, 1200W / 1600W, 18 of 6-pin PCIe Connectors

#ad
#ad
BIT-CnTech APW3++-12-1600-A3 #ad - Package includes: 1x switching power Supply for AntMiner Note: Power cord is not included, requires standard PC power cable C13. If you have any question, welcome to contact us by E-mail, We would try our best to help you slove the problem ASAP. Input: 200-240v ac 10a max, output: 12v 133A 1596W Max. Model number: apw3++-12-1600-a3; wide voltage design; pfc Type: Active PFC; Connectors: 18 of 6-pin PCIe.

Lifetime Warranty. 14 awg x 3c, sjt, 15a, 125 volt. Ul, rohs Compliant. Brand new and high quality switching Power Supply for Bitmain AntMiner L3+ S9 T9. Etc. Input: 100-140v ac 14a max, output: 12v 100A 1200W Max. This great quality ac-dc switching power supply is the most advanced and efficient power supply for bitmain antminer models as yet, active PFC, Temperature, Good Output Dynamic Performance and High Power Density Advantage, Overflow, has High Conversion Efficiency, Wide Voltage Design for best output efficiency, Model Number: APW3++-12-1600-A3, Underpressure Protection, compatible with: Bitmain AntMiner L3+ S9 T9 D3.

Switching Power Supply for Bitmain AntMiner L3+ S9 T9 Model Number: APW3++-12-1600-A3, Wide Voltage Design, 1200W / 1600W, 18 of 6-pin PCIe Connectors #ad - . Etcnot fit for antminer g1 when input 100-140v ac power, this switching power supply could work on any one of antminer model except AntMiner G1 When input 200-240V AC power, this Switching Power Supply could work on 2 of AntMiner L3+ or any one of other AntMiner modelExcept AntMiner G1 External remote switching machine internal reserved port Active power factor correction function, PF > 0.

99 full load The maximum efficiency can reach 93.

More information about BIT-CnTech APW3++-12-1600-A3 #ad


Similar products



Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 14TH/s

#ad
#ad
yoyo Antminer S9 #ad - Expected discrepancy of +10% Power Efficiency:0098 j/gh +10% at the wall with bitmain's apw3 psu, 93% efficiency, 25°C ambient temp Rated Voltage:11. 60 ~13. 00v chip quantity per unit:189x bm1387 dimensions:350mml x 135mmw x 158mmh cooling:2x 12038 fans; front fan: 6000rpm, rear fan: 4300rpm operating temperature:0°c to 40°c network connection:ethernet frequency:automatically set WARRANTY FOR THE S9 IS DIRECTLY WITH BITMAIN ALL WARRANTY PAPERWORK INFORMATION WILL BE INCLUDED IN YOUR SHIPMENT Molded, heavy-duty Power Cable, 6 ft.

Iec-60320-c13 to nema 5-15P. Variation of ±5% is expected Power Consumption:1127W 11. 5th/s batch, 1225W 12. 5th/s batch, 1274w 13th/s batch, 1323W 13. 5th/s batch, 93% efficiency, with bitmain's apw3 psu, 1372W 14TH/s batch at the wall, 25°C ambient temp. Each antminer s9 employs 189 such chips to deliver more hashrate and efficiency than any bitcoin miner ever made.

Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 14TH/s #ad - Input: 200-240v ac 10a max, output: 12v 133A 1596W Max. Bm1387 chip is built using tsmc's 16nm FinFET technology and, delivering a record-breaking 0098 j/ghs, is the world's most efficient bitcoin mining chip in the consumer market. Package includes: 1x switching power Supply for AntMiner Note: Power cord is not included, requires standard PC power cable C13.

14 awg x 3c, sjt, 15a, 125 volt.

More information about yoyo Antminer S9 #ad


Similar products



AntMiner Power Supply APW3++ [email protected] [email protected] w/ 18 Connectors

#ad
#ad
Bitmain Technologies APW3++ #ad - Input: 200-240v ac 10a max, output: 12v 133A 1596W Max. Regular 110/120v power will not provide enough to run machine. Designed for the AntMiner L3+. Please check the voltage on the circuit you intend to use. Model number: apw3++-12-1600-a3; wide voltage design; pfc Type: Active PFC; Connectors: 18 of 6-pin PCIe.

Input: 100-140v ac 14a max, output: 12v 100A 1200W Max. The apw3++ can only power one antminer L3+ miner if it is connected to a 110V mains power supply. The power cord is not included, please find one with at least 10A from your local market. It can also power the antminer D3 or S9 while connected to a 220V power outlet.

AntMiner Power Supply APW3++ [email protected] [email protected] w/ 18 Connectors #ad - To power two antminer l3+ miners with the APW3++, it must be connected to a 220-240V circuit. 18 x 6-pin pcie power connectors capable of supporting 2 AntMiner L3+s when using 220v. Package includes: 1x switching power Supply for AntMiner Note: Power cord is not included, requires standard PC power cable C13.

Requires 208-240v power. 14 awg x 3c, sjt, 15a, 125 volt. Ul, rohs Compliant. Molded, heavy-duty Power Cable, 6 ft.

More information about Bitmain Technologies APW3++ #ad


Similar products



Power Supply for Bitmain AntMiner L3+ S9 T9 D3APW3++-12-1600W-A3//10 Connectors

#ad
#ad
Bitman #ad - 110/120v will not power a s9 electrical specifications: condition: brand new & great quality model number: apw3++-12-1600-a3 wide voltage design: input: 100-140v ac 14a max, output: 12v 100a 1200w max Input: 200-240V AC 10A Max, Output: 12V 133A 1596W Max Connectors: 10 of 6-pin PCIe ConnectorsLow-voltage Input:80-89V AC Output Short Circuit:Yes Output Overcurrent:134-185A max.

Overheart protection:yesstructure:2200mm*108mm*62mm Includes: 1x Power Supply for AntMiner All parts are tested and quality controlled prior to shipment. 18 x 6-pin pcie power connectors capable of supporting 2 AntMiner L3+s when using 220v. For s9 miner, 208-260V power is required. Model number: apw3++-12-1600-a3,connectors: 10 of 6-pin PCIe.

Power Supply for Bitmain AntMiner L3+ S9 T9 D3APW3++-12-1600W-A3//10 Connectors #ad - Please check the mains power supply that is the standard in your region before ordering. Package includes: 1x switching power Supply for AntMiner Note: Power cord is not included, requires standard PC power cable C13. Input: 100-140v ac 14a max, output: 12v 100A 1200W Max. 14 awg x 3c, 15a, sjt, 125 volt. Ul, rohs Compliant.

Brand new and high quality switching Power Supply for Bitmain AntMiner L3+ S9 T9 D3.

More information about Bitman #ad


Similar products



Tripp Lite Heavy-Duty Computer Power Cord 14AWG 15A NEMA 5-15P to IEC-320-C13 10-ft.P007-010

#ad
#ad
TRIPP LITE P007-010 #ad - C13 to 5-15p power cable, 10 ft. 14 awg x 3c - 15a - 125V. C13 to 5-15p connectors, 3 x 14 awg conductors, 15A / 125V rating. Package includes: 1x switching power Supply for AntMiner Note: Power cord is not included, requires standard PC power cable C13. 14 awg x 3c, sjt, 15a, 125 volt. Ul, rohs Compliant. Brand new and high quality switching Power Supply for Bitmain AntMiner L3+ S9 T9.

. Etc. Package includes: 1x power supply for AntMinerNotes: Power cord is not included, requires standard PC power cable C13). Input: 100-140v ac 14a max, output: 12v 100A 1200W Max. Use tripp lite's p007-010 in server applications that require a higher rated, heavier gauge cable. Model number: apw3++-12-1600-a3,connectors: 10 of 6-pin PCIe.

Tripp Lite Heavy-Duty Computer Power Cord 14AWG 15A NEMA 5-15P to IEC-320-C13 10-ft.P007-010 #ad - Model number: apw3++-12-1600-a3; wide voltage design; pfc Type: Active PFC; Connectors: 18 of 6-pin PCIe. 18 x 6-pin pcie power connectors capable of supporting 2 AntMiner L3+s when using 220v. Input: 100-140v ac 14a max, output: 12v 100A 1200W Max. Supplies 1200w over 110v-120v and 1600W over 220v-240v. The power cord is not included, please find one with at least 10A from your local market.

More information about TRIPP LITE P007-010 #ad


Similar products



AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner With Power Supply Included Ready To Ship Now

#ad
#ad
Bitmain L3+ #ad - Lifetime Warranty. Input: 200-240v ac 10a max, output: 12v 133A 1596W Max. Requires 208-240v power. Package includes: 1x power supply for AntMinerNotes: Power cord is not included, requires standard PC power cable C13). 15 batch antminer L3+ never over clocked or over run. Hash rate: 504mh/s ±7%. Lifetime Warranty.

Input: 100-140v ac 14a max, output: 12v 100A 1200W Max. Input: 200-240v ac 10a max, output: 12v 133A 1596W Max. Rohs compliant, UL Listed. Molded, heavy-duty Power Cable, 6 ft. Iec-60320-c13 to nema 5-15P. In hand ready to ship next day! each Antminer L3+ comes with Apw5 PSU Factory warranty from bitmain still applicable.

AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner With Power Supply Included Ready To Ship Now #ad - The power cord is not included, please find one with at least 10A from your local market. Designed for the antminer:l3+/s9/t9/D3, 1200W / 1600W. Input: 100-140v ac 14a max, output: 12v 100A 1200W Max. Power consumption: 800W ±10%. Psu apw3++ is included for free. C13 to 5-15p power cable, 10 ft. 14 awg x 3c - 15a - 125V.

More information about Bitmain L3+ #ad


Similar products



TRIPP LITE P007-012 12-Feet 14AWG 15A Heavy Duty Computer Power Cord

#ad
#ad
TRIPP LITE P007-012 #ad - The power cord is not included, please find one with at least 10A from your local market. Designed for the antminer:l3+/s9/t9/D3, 1200W / 1600W. Requires 208-240v power. 18 x 6-pin pcie power connectors capable of supporting 2 AntMiner L3+s when using 220v. 12ft c13 to 5-15p heavy duty pwr cord Molded, heavy-duty Power Cable, 6 ft.

Iec-60320-c13 to nema 5-15P. Power consumption: 800W ±10%. Input: 100-140v ac 14a max, output: 12v 100A 1200W Max. 14 awg x 3c, sjt, 15a, 125 volt. Ul, rohs Compliant. Iec-60320-c13 to nema 5-15P. Input: 100-140v ac 14a max, output: 12v 100A 1200W Max. Psu apw3++ is included for free. Brand new and high quality switching Power Supply for Bitmain AntMiner L3+ S9 T9.

TRIPP LITE P007-012 12-Feet 14AWG 15A Heavy Duty Computer Power Cord #ad - . Etc. Rohs compliant, UL Listed. Lifetime Warranty. Lifetime limited warranty.

More information about TRIPP LITE P007-012 #ad


Similar products



Electricity Usage Monitor Power Meter Plug Home Energy Watt Volt Amps KWH Consumption Analyzer with Digital LCD Display Overload Protection

#ad
#ad
YOUTHINK #ad - C13 to 5-15p power cable, 10 ft. 14 awg x 3c - 15a - 125V. You can press the reset button to reset it high quality backlit lcd display: the digital large backlit LCD display screen make you easy to read and record cumulative kilowatt-hour, time and electricity expenses Electricity Usage Analyzer: With this electricity usage monitor, you can monitor which appliances are the killers of the high cost of energy.

Rohs compliant and UL Listed. Fastest litecoin ASIC miner. Model number: apw3++-12-1600-a3; wide voltage design; pfc Type: Active PFC; Connectors: 18 of 6-pin PCIe. Overload protection: when the whole power exceeds the rated power of monitor, LCD will display "OVERLOAD" with booming noise to warn the user. Input: 100-140v ac 14a max, output: 12v 100A 1200W Max.

Electricity Usage Monitor Power Meter Plug Home Energy Watt Volt Amps KWH Consumption Analyzer with Digital LCD Display Overload Protection #ad - Input: 200-240v ac 10a max, output: 12v 133A 1596W Max. Package includes: 1x power supply for AntMinerNotes: Power cord is not included, requires standard PC power cable C13). 14 awg x 3c, sjt, 15a, 125 volt. Ul, rohs Compliant. Package includes: 1x switching power Supply for AntMiner Note: Power cord is not included, requires standard PC power cable C13.

Various parameters: powerw, amps, energy kwh, Cost and Minimum & Maximum Power, voltage, Power Factor, Ideal for energy consumption monitor of home appliances.

More information about YOUTHINK #ad


Similar products